Beginner Woodworking Tools: All You Need To Know

Introduction

Are you interested in woodworking projects?

Or do you have the passion for doing the carpentry?

If your answer is yes, this is the right place for you. This is the best place for anyone who loves woodworking. Especially for the beginners, you are going to learn some incredible features of the popular woodworking tools.

In particular, I am going to show you some beginner woodworking tools which are necessary for most projects. I am very happy to share my knowledge and experience with all people having the same interest as me. Let’s get started!

Get To Know The Beginner Woodworking Tools

Many years ago, I have worked as an apprentice to a fine furniture builder and have been a professional woodworker for the past 20 years. I know that many young people are struggling with the woodworking problems right now. They do not know how to pick the right tools for the very first project.

What basic tools does a carpenter need?

If you are interested in woodworking, you need to know the necessary toolkit to simplify your work. For instance, you need to know some basic woodworking power tools as well as the hand tools. By taking advantage of these woodshop tools and equipment, you are going to master your work.

The basic woodworking power tools

What are the power tools?

Which tools should we get when starting with woodworking?

I have got these questions all the time, and that is why I am going to show you the answer in this part. We are going to cover the necessary power tools that every woodworking beginner need to have.

The table saw or the miter saw

If you want to upgrade your tools, you need to think of the table saw or the miter saw first. You can use them for cross-cutting depending on what you want to build. It is very awesome since you can turn it to the different angles.

As a result, it is very easy to make quick work of cutting through the dimensional number. Some people might be confused between these two, but you can consider your needs. Each of them has certain functions and minus points. Thus, they will work very well if you know how to use them properly.

The router

The first important beginner woodworking tool is a router. It is one of the best multitaskers in your shop. You can do the jointing with the router or flush trimming. When mentioning the router, you may only think of the edge treatments. But it can be much more useful than that. You can choose either a fixed base router or a plunge router.

The router. Source: Amazon.com

However, you can still round the wood edges without the router. Have you ever heard of this piece of information? Let’s check it out!

The random-orbit sander

The second one is a random-orbit sander. It will save you more time since it gets more sandpaper on the surface. It is designed in a random orbital pattern which is not noticeable to your eyes. Therefore, you will get less pig-tail squiggly lines.

The random-orbit sander. Source: Amazon.com

The most critical factor for the sander is the vibration. Hence, you need to try as many models as possible to see which one vibrates your hands the least. That is why I highly suggest that you should choose.

The drill

Moving to the next one, you really need a good drill. Well, you do not need to get all different types of drills. On the other hands, you only need to have the standard drill driver. This is one of the most useful tools in woodworking. It allows you to drill holes and do the joinery.

The drill. Source: Amazon.com

>>> See drill on Amazon

If you have a shop with the concrete walls, you should get a hammer drill. This drill is designed with a mode for drilling into masonry. By this way, you can drill into the concrete a lot more easily.

Besides, you should consider buying the drill with variable speed. Thus, when you drill into different types of materials, you can adjust the speed. Also, make sure that your drill has a good battery. In some projects, you need to use the drills very often. Hence, a big capacity battery is going to be your priority.

Also, you can choose the drill with a countersink. I like this feature so much since you can set the depth so that you can have a really clean and consistent hole. As a consequence, you will make your pieces look a lot nicer and reduce the splitting in hardwoods. In addition, the screws can be flushed with the surface without cracking the wood.

The impact driver

You need to have the impact driver when it comes to the beginner woodworking tools. You can drill the holes and then drive the fasteners with the impact driver. It is very powerful, so you do not have any troubles with the fragile screws or the brass screws.

The circular saw

How about a circular saw?

This tool should appear on your mind when you get started with woodworking. If you do not have a good-quality saw, a medium quality is going to work well. The circular saw is versatile and accurate. The most essential element of the saw is the blade. The blade will make all the difference in the world.

The circular saw. Source: Amazon.com

You can use this tool to cut the sheet goods or even the solid wood. On top of that, if you want to work with plywood or MDF, a circular saw is going to be your best friend. Moreover, I highly recommend that you should use the cordless circular saw. It is very convenient since you do not have to drag around a power cord. Furthermore, the power is pretty compatible with the corded tools these days.

The jigsaw

Sometimes, you need to cut the curves and the non-straight lines, and that is why you need a jigsaw. You can also replace the jigsaw with the band saw based on your situation. You do not need to buy high-quality jigsaw. The reason is that you probably need to sand the curves afterward.

Using the jigsaw can help you get into the tighter spots as the footprint is a lot smaller. Moreover, you can change the blades to cut a bunch of different materials. When buying a jigsaw, you need to pay attention to the base to make sure it is nice and solid.

The jigsaw. Source: Amazon.com

There are some oscillating modes in the jigsaw. This factor will help you get through the material a little bit faster. There is another mode where it will actively blow the dust out of the way while you are cutting.

When you are using the jigsaw, there are a lot of times when the dust is going to build up. Therefore, it is very hard to see the lines. As a result, this is a nice feature to consider before buying a jigsaw for yourself.

In case you want an upgraded version of the jigsaw, you can buy a bandsaw. It is a very nice gem in your hand if you want to make the curved cuts.

The jointer and the planer

Do you need a jointer and a planer for woodworking?

The jointer. Source: Amazon.com

It depends on your purpose and your project. First of all, the jointer is going to give you a single flat side of the board. Then, you can run it through a planer to make things parallel or consistent thickness. Therefore, if you want the consistent thickness but it is not flat, then go ahead and run it through the planer.

On the other hand, if you want something that has two flat sides but not a consistent thickness, you can run both sides on the jointer. And of course, if you want a consistently thick board that is flat, run that board over the jointer and then fit it into the planer.

The basic woodworking hands tools

The most frustrating thing for a new woodworker is the inadequate tools for the job. You do not have to go out and spend thousands of dollars on tools to do a basic job. My recommendation is to buy the necessary tools to accomplish the project in your mind.

Moreover, understanding clearly about the woodworking tools is one of the first steps. In particular, you need to know the purpose of the carpentry power tools and the carpentry hand tools. By this way, you will easily complete your basic woodworking projects.

The role of power tools is very important. But if you get into woodworking, you cannot ignore the hand tools. They are essential to doing good work. In addition, they can increase the versatility of what you can do as well as your skills.

The chisels

So, a good set of chisels is very important. You need to have some specific measurements including a quarter inch, a half inch, three quarters, and one inch. You are going to use these items on every single project. But remember that you should sharpen your chisels for the best use.

Chisels. Source: Pixabay.com

In particular, you can buy some blocks of the diamond plates. After sharpening the chisels, you need to polish them also. You can buy the mahogany block with a leather piece on one surface. You can put some cumin oxide on the leather to get a mirror finish polish on your chisels.

The multipurpose saw

Then, you need to have a good multipurpose saw. Some people may think that you already have the power cutting implements. Therefore, a hand saw is not useful. However, you may get surprised at how many binds this incredible will get you out of.

The screwdrivers

The screwdrivers. Source: Pixabay.com

Another useful beginner woodworking tool is the screwdriver. You need to have the full array and they come in a variety of sizes. There are some good-quality screwdrivers that have a magnetic catch. So, when you put the tip in there, it actually draws it in and holds it. By doing this, you can use it upside down without worrying about falling out.

The square

Next, you need to purchase some good steel squares to make sure that your work is always accurate. You can buy a 6-inch and 12-inch models since they are not very expensive. And of course, your work will become more perfect thanks to the support of this tool.

The knife

All of your layouts are going to happen with a knife. Having a layout is all you need for the precision, so you need a double beveled knife for your work. This is different from the Japanese knife, which is only single beveled. It means that they have one straight side and the other curved side.

The bevel does matter when you are laying out your joinery. Therefore, having this type of knife is better than the utility knife. The reason is that it does not have a long blade.

The mallet

Going to the next one, you may need a mallet for your woodworking projects. You can get a good one from any hardware stores. There is an assembly hammer hard surface on one side and a soft surface on the other side.

It does not mark the surface and gets a good center of percussion. Instead of getting the big mallet, the medium one is better since it gives you a more comfortable feeling on your hands.

The other tools

Moreover, you need a measuring tape to read the figures. Furthermore, clamps are very important for clamping the wood together. These are the basic hand tools that you need to prepare before learning how to do the woodworking.

Conclusion

In summary, I hope that all of the information in this article will give you an overview of the beginner woodworking tools. After going through this article, you will know the necessary tools to accomplish your starting projects. These are the minimum tools for woodworking that you can easily buy.

However, you need to identify the most suitable woodworking tools for yourself. However, in case you have any queries or confusion, please feel free to keep in touch with me anytime.

This article uses some reference images on Amazon.com